Second Generation Pedestal Set
This 2 piece set comes with the following parts:
- 2-7/8″ post in a satin finish with a 9″ low-profile base
- 2-7/8″ trac-lock swivel
They are available in heights of 12″, 18″, 24″, and 30″.
These swivels are compatible with the swivel footrest and the universal trac-lock slide.
Bentley part # 100643 – 12″
# 100644 – 18″
# 106645 – 24″
# 106646 – 30″
Mainstay Pedestal
This pedestal offers an air-powered height adjustment ranging from 14″ to 20″. It has a 2-3/8″ post with a 9″ round base and an anodized finish. The mainstay comes standard with a non-locking track-lock swivel.
Two available sizes:
Regular: 14-1/2″ to 19-1/2″
Short: 12-1/2″ to 15-1/2″
Bentley part # 100647 – regular
# 100648 – short
Seat Swivel – Non-locking
Non-locking 7″ square seat swivel with a 4-hole pattern used for attachment to a boat seat.
Available in either a black e-coated or stainless steel finish.
Bentley part # 100639 – black e-coated
Bentley part # 100640 – stainless
Top, Sides, and Camper Extension
The top, sides, and camper extension package allows the boater to be fully enclosed. The forward top comes back on the boat to cover approximately 6 feet of the cockpit area. The camper section then zips to the back edge of the front top and goes back to the stern for a full enclosure that has headroom to the stern of the boat. This package is perfect for the boater that likes to cruise, camp or fish. Comes with non-corrosive fasteners, heavy-duty #10 YKK zippers, 7/8” anodized aluminum frame, nylon fittings, marine grade material, and windows in all curtains using .030 gauge plastic. This style of top is typically manufactured using either Top Gun or Sunbrella material.
Additional options available include but are not limited to…
-
Top Boot
-
Storage bags
-
Additional rear entry points in extension (1 standard)
-
Bar supports
-
Double wall bows
Top Complete – Top, Sides, & Stern cover
Our top complete is a standard package which includes a top, side curtains, and a stern cover. The top is supported by an 7/8″ aluminum frame complete with nylon fittings. Most tops have a two bow frame unless the span between the bows will be more than 40″. If that is the case, then a third bow will be added. The stern cover zips to the back edge of the top and slopes back to the stern of the boat. This package is perfect for the boater that wants a top to get out of the weather and a full cockpit enclosure when moored or stored. Constructed with non-corrosive fasteners, heavy-duty #10 YKK zippers, 7/8” anodized aluminum frame, nylon fittings, marine grade material and windows in the side curtains using .030 gauge plastic. This style of top is typically manufactured using either Top Gun or Sunbrella material.
Additional Options include but are not limited to…
- bar supports (front or rear)
- top boot
- double wall frame
- 2 zipper hatch in top
Bimini Top
The Bimini top is able to mount on any boat to the tower or gunnels. Our custom tops allow the boat owner to choose the height and length to fit specific needs. This is a 3 bow top typically manufactured using Sunbrella material which is available in a multitude of color choices. This top is popular on tournament or ski boats and is perfect for those of us who need a break from the sun.
Additional options available include but are not limited to…
- top boot
- upgrade to stainless steel fittings
Tonneau Cover
The tonneau cover is an easy to put on custom made cover which fastens to the windshield, slopes to the transom and snaps along the gunnel’s edge to protect the cockpit area. This cover is suitable for trailering, mooring and storage. Perfect to keep weather out, protect your upholstery and keep your valuables out of site. Comes with non-corrosive fasteners and cover supports so the cover doesn’t pocket water. This style of cover is manufactured using Sunbrella material. An over-the windshield option is available as well.
Utility Trailer Cover
Utility Trailer Cover- Form fitting cover to keep you moving down the road.
The UTILITY TRAILER COVER is a form fitting cover that can be trailered down the road. It has a grommet and stretch cord system to hold the cover down to the trailer and makes the cover easy to get on and off. Comes with heavy truck tarp vinyl, grommets, ¼” stretch cord and hooks if needed.
Top, Sides, & Straight Drop
This popular package includes a top, side curtains, & straight drop. The top comes back on the boat to cover approximately 6 feet of the cockpit area. The straight drop then zips to the back edge of the top and drops down to the floor giving you about a 6-foot enclosure. This package is perfect for the fisherman because it leaves the back of the boat open for fishing or crabbing. Constructed with non-corrosive fasteners, heavy-duty #10 YKK zippers, 7/8” anodized aluminum frame, nylon fittings, marine grade material and windows using .030 clear plastic. This style of top is typically manufactured using either Top Gun or Sunbrella material.
Additional options available include but are not limited to…
-
top boot
-
storage bags
-
2 zipper hatch in top
-
bar supports
-
double wall bows
Fisherman Top
The Fisherman top is what is put on a boat without a permanent windshield. It has an independent standing main section with zip-on sides and front curtain. It has clear plastic in all the curtains and a zipper up the center of the front curtain to access the bow for anchoring. It comes with non-corrosive fasteners, heavy-duty #10 YKK zippers, 7/8 anodized aluminum frame, nylon fittings, marine grade material and windows in all curtains using .030 gauge plastic. This style of top is typically manufactured using either Top Gun or Sunbrella material.
Additional Options include but are not limited to…
- bar supports (front or rear)
- top boot
- double wall frame
- additional front entry point